Universal WiFi Repeater COOL 300 MBPS

COOL Universal Wifi Repeater 300 mbps

This device has Repeater and Amplifier modes. Select one of them.

- Repeater: extends the existing Wifi signal.
- AP: create a new Wifi access for more devices.

Characteristics:

• Improves wireless coverage on all WLAN networks
• WLAN 802.11n for high-speed wireless access
• Low compatible with 802.11g (54Mbit/s) and 802.11b (11Mbit/s)
• Support for 2.4 Ghz WLAN networks
• Maximum WLAN security with WPA2, WPA and WEP (128/64)
• Easy setup wizard software
• integrated antennas
• Product blister measurements: 11.7 x 6.5 x 11.7 cm

Connect device:

1. Plug the device into a socket near the router. Wait for 15 seconds, and the Wifi repeater will connect.

2. Find the signal “Wireless-Nc” and click to connect.

3. After connecting, it will open the admin page automatically on your mobile or manually on your computer
(enter the browser and write the IP address 192.168.10.1 in the URL bar to enter).

- User: admin
- Password: admin

Amplifier mode:

- Complete steps 1, 2 and 3 above. Then on the browser page select AP Mode.

- Put name and password to the Wifi access point.

- Connect the home router to the repeater through a LAN port.

Repeater mode:

- Complete steps 1, 2 and 3 above. Then, on the browser page select Repeater Mode.

- The repeater will search for available Wifi signals automatically. Choose the signal you want to use.

- Put the password of the Wifi signal selected in the previous step of the Amplifier Mode.

- (Optional). You can change the Wifi network name and password. Click OK to save the settings.

- Close the browser. Open the list of Wi-Fi networks and look for the new Wi-Fi signal from the repeater. Enter your password to access the Internet.